[Abstract]
Starting from July 8, 2026, the U.S. Consumer Product Safety Commission (CPSC) will implement new electronic filing rules for certificates of compliance (eFiling), requiring imported consumer products for which a Children's Product Certificate (CPC) or General Certificate of Conformity (GCC) must be issued to proactively submit certificate data through U.S. Customs and Border Protection's (CBP) Automated Commercial Environment (ACE). At present, this only changes the submission method and does not impose additional testing or certification obligations. Enterprises must determine the scope of application through a three-tier assessment: regulatory jurisdiction, certification obligations, and import status. Filing may use either Full PGA (seven complete data elements) or Reference PGA (three certificate identifiers) mode. Certificate data must be true and complete; false filing may trigger civil penalties and, in serious cases, may constitute a federal crime. Chinese enterprises should implement compliance measures across four stages: product inventory, test certificate verification, import declaration coordination, and ongoing version management, to prevent risks such as customs clearance delays and fines.
Introduction
For a long time, Chinese enterprises carrying out U.S. consumer product safety compliance work have mainly focused on whether products can pass third-party testing, whether a Children's Product Certificate or General Certificate of Conformity has been issued, and whether product labels and warnings comply with relevant technical standards. Under the traditional model, certificates of compliance are usually kept as paper documents, electronic files, or web links, and only when the U.S. Consumer Product Safety Commission (hereinafter referred to as "CPSC") or U.S. Customs and Border Protection (hereinafter referred to as "CBP") requests them does the importer need to further provide the certificate and its testing basis.
However, with the rapid development of cross-border e-commerce, small parcels, and multi-tier supply chain models, the original system—based mainly on enterprises retaining certificates themselves and regulators retrieving them after the fact—has become difficult to adapt to the reality of continuously increasing volumes of imported consumer products. The lack of a unified correspondence among certificate names, product models, manufacturing locations, and test reports also makes it difficult for regulators to quickly identify product risks at the import stage. Against this background, the CPSC amended Title 16, Part 1110 of the U.S. Code of Federal Regulations (16 CFR § 1110) to establish an electronic filing system for certificates of compliance for consumer products (hereinafter referred to as "eFiling"). eFiling only changes the submission method for certificates of compliance—from "passive retention for inspection" to "proactive filing"—and does not change product testing, certification, or compliance obligations themselves; in principle, it does not require products to be retested.
Starting from July 8, 2026, most imported consumer products for which a certificate of compliance must be issued by law should submit certificate data through CBP's Automated Commercial Environment (hereinafter referred to as "ACE") when completing import declarations; products entering consumption or warehousing from U.S. foreign trade zones will be subject to the corresponding requirements starting from January 8, 2027.[2] eFiling converts information such as product identification, applicable rules, manufacturing location, testing laboratory, and certifying entity into structured data, enabling the CPSC to conduct risk analysis before goods enter the U.S. market. As a result, the compliance work of Chinese manufacturers and exporters will extend across the entire consumer product export process, including product classification, regulatory identification, supplier management, certificate versions, import data, and post-market incident handling.
I. Regulatory Background of the CPSC Electronic Filing System for Certificates of Compliance
(1) U.S. Consumer Product Safety Regulation and Product Certification System
The CPSC is the federal agency responsible for U.S. consumer product safety regulation. Its authority mainly derives from laws such as the Consumer Product Safety Act (CPSA), the Consumer Product Safety Improvement Act (CPSIA), the Federal Hazardous Substances Act (FHSA), the Flammable Fabrics Act (FFA), and the Poison Prevention Packaging Act (PPPA). The CPSC regulates consumer products entering the U.S. market by formulating mandatory product safety standards, overseeing third-party laboratories, inspecting imported consumer products, investigating product incidents, and implementing recalls.[3]
When conducting compliance reviews, enterprises must first determine whether a product is a "consumer product" within CPSC jurisdiction. Although some products are sold to consumers, they may be primarily regulated by other agencies such as the U.S. Food and Drug Administration, the Environmental Protection Agency, the National Highway Traffic Safety Administration, or the Federal Communications Commission. For composite products that combine ordinary consumer, electrical, communications, or medical functions, multiple agencies may separately regulate different risk matters. Therefore, confirming regulatory jurisdiction over a product is a prerequisite for identifying subsequent testing, certification, and filing obligations.
Within the CPSC regulatory system, a distinction should also be made between children's products and general-use products. Products primarily designed or intended for use by children aged twelve or younger and subject to children's product safety rules should, in principle, be tested by a CPSC-accepted third-party laboratory, and a Children's Product Certificate (hereinafter referred to as "CPC") should be issued by the legally responsible certifying entity. General-use products subject to mandatory rules generally require a General Certificate of Conformity (hereinafter referred to as "GCC") based on testing or a reasonable testing program. Generally speaking, the testing laboratory is responsible for producing test results, and the manufacturer or importer drafts and issues the CPC or GCC based on satisfactory test results; the certificate is essentially a formal statement by the manufacturer or importer that the product complies with all applicable rules.[4]
Furthermore, being within CPSC jurisdiction does not automatically mean that a certificate must be issued for the product. Only when a product is subject to a mandatory rule, ban, standard, or regulation enforced by the CPSC and a certification obligation arises by law is it necessary to issue a CPC or GCC and further apply eFiling. Enterprises therefore cannot determine filing obligations solely based on product names or customs tariff codes; they should review product use, target age, material composition, structural function, and all applicable rules.
(2) Limitations of the Traditional Certificate System and the Transformation of the Regulatory Model
Before eFiling is fully implemented, certificates of compliance may be provided to distributors, retailers, and regulators through paper documents, electronic files, or web links. In most import scenarios, certificates only need to be further retrieved by the importer when requested by the CPSC or CBP, and their limitations have gradually become exposed against the background of a diversified import-export economy.
Specifically, first, certificates prepared by different enterprises lack a unified standard for product names, models, rule citations, and manufacturing information. Some enterprises use only general names such as "children's toys," "furniture," or "electrical appliances" to describe products, while some certificates state only that the product "meets CPSC requirements" without listing the applicable federal rules item by item. This makes it difficult for regulators to match certificates with specific declared goods, test samples, and sales models through automated means.
Second, the traditional system also suffers from the separation of trade data and product safety data. Customs declaration information mainly includes the name, quantity, value, country of origin, and tariff code of goods, while product test reports record information such as materials, models, manufacturing locations, test dates, and laboratories. The lack of a stable link between the two types of data makes it difficult for the CPSC to identify anomalous relationships among different importers, manufacturers, and laboratories before goods enter the market.
Third, some enterprises have problems such as different product models sharing the same certificate, continued use of old test reports after product modifications, and failure to reassess certificate validity after changing factories. Because relevant materials are scattered among manufacturers, importers, laboratories, and customs brokers, regulators often can discover inconsistencies between certificates and actual goods only after products are selected for inspection or an incident occurs.
For this reason, the CPSC has adjusted certificate regulation from passive post-hoc retrieval to proactive import submission. The final rule of 16 C.F.R § 1110 published in 2025 amended the content and provision method of certificates and requires imported consumer products subject to certification by law to submit certificate data through ACE.[5] After the system is officially implemented on July 8, 2026, the CPSC regards it as an important modernization measure for the import regulatory system, aimed at concentrating regulatory resources on identifying high-risk goods while reducing unnecessary inspections and customs clearance delays for compliant importers.[6]
(3) Formation of Data Fields and Their Regulatory Functions
The core of the eFiling system is the field-based processing of certificate of compliance content. According to CPSC operational instructions, the Full Partner Government Agency Message Set (hereinafter referred to as "Full PGA Message Set") requires submission of seven basic categories of certificate data:
Product ID
One of GTIN, SKU, UPC, model number, serial number, registration number, or alternative number; it is recommended that at least one number can be found on the product packaging, packing list, or commercial invoice[7]
Citation Codes
The CPSC safety standard or regulation number applicable to the product
Manufacture Date
The production date of the finished product
Manufacture Place
The name, full address, and contact information of the manufacturer
Product Test Date
The date of the most recent compliance test
Testing Laboratory
The name, full address, and contact information of the laboratory
Point of Contact
The name, full address, and contact information of the person who maintains the test records
The citation codes reflect the mandatory rules legally applicable to a product, and in essence they are the result of an enterprise's legal identification of a product's age attributes, materials, functions and use scenarios. For products subject simultaneously to product-specific standards and horizontal safety requirements, the corresponding rules should be listed separately. For example, children's toys may not only be subject to 16 C.F.R § 1250[8] and the corresponding clauses of the Standard Consumer Safety Specification for Toy Safety (hereinafter referred to as "ASTM F963" clauses[9]), but may also involve lead content, phthalates and small parts requirements at the same time. The CPSC has published code materials such as Citation Code, Testing Exclusion Code and Disclaim in the eFiling Document Library, but it also notes that the relevant lists are mainly for declaration guidance, and enterprises still need to make independent judgments in light of the specific product rules.[10]
The date of manufacture and place of manufacture come from factory production records, while the test date and laboratory information come from the test reports supporting the certification. When an enterprise relies on component testing to issue a finished-product certificate, it should also reflect in the certificate the rules corresponding to the relevant testing, the most recent test date and the laboratory; where a statutory testing exclusion applies, the corresponding testing exclusion code must also be submitted. Once these fields enter ACE, regulators can conduct cross-analysis around products, importers, manufacturers, factories and laboratories. For example, whether the same product identifier suddenly corresponds to different manufacturing locations, whether the same laboratory provides testing on the same date for a large number of unrelated products, and whether the rules declared for a product are clearly inconsistent with its tariff classification number and historical import records. In this way, eFiling transforms an enterprise's internal testing and production information into the basis for import risk screening.
II. The Scope of Application of the New eFiling Rules and Product Certification Requirements
(1) The Three-Tier Assessment of Scope of Application
To determine whether a product exported to the United States requires eFiling, a three-tier review can be carried out in sequence.
The first tier is the regulatory attribution review, that is, confirming whether the product falls under CPSC jurisdiction. Enterprises can first conduct a preliminary search through the CPSC Business Guidance Library, the Regulated Product Database or the Regulatory Robot, but for products with multiple functions, judgment should still be made in light of their primary use and specific risks. The CPSC's "Does eFiling Apply to Me" guidance also treats the identification of product regulation and certification rules as the first step in determining applicability.[11]
The second tier is the certification obligation review, that is, confirming whether the product is subject to a mandatory rule, ban, standard or regulation that legally requires the issuance of a certificate. If a product falls under CPSC jurisdiction but no certificate obligation yet exists, then generally no new certification requirement is added by the eFiling system. Conversely, as long as a product originally requires the issuance of a CPC or GCC, electronic certificate data should in principle be submitted when importing into the United States.[12]
The third tier is the import status review, that is, confirming whether the goods are a finished product entering the United States for consumption or warehousing purposes. Genuine components used for subsequent production generally do not need to submit a finished-product certificate separately at the time of import, but if so-called "components" already have consumer-use functions and can be sold after simple packaging or a small amount of assembly, regulators may still treat them as finished products based on their actual status.[13]
In addition, there is no general exemption for low-value imports. The CPSC has made clear that where a product legally requires certification, the certificate must be declared online regardless of the import value; Section 321 or what is commonly called de minimis goods[14] do not enjoy an eFiling exemption. Commercial cross-border e-commerce sales, including sales by a consumer to another consumer through an online platform, may also fall within the scope of application.[15]
(2) Children's Products and Their CPC Requirements
The compliance chain for children's products is generally "identify all applicable children's product safety rules ⟶ test by a CPSC-accepted laboratory ⟶ obtain a passing test report ⟶ issue a CPC ⟶ submit electronic certificate data". A third-party laboratory can only test the specific rules within its accepted scope; an enterprise cannot presume that a laboratory can test all children's product items merely because the laboratory has been listed by the CPSC.
Common categories requiring third-party testing and a CPC include children's toys, strollers, cribs, children's high chairs, children's sleepwear, pacifiers, rattles, children's bicycle helmets and many categories of durable infant or toddler products. Children's toys are generally subject to 16 CFR § 1250, and the specific ASTM F963 clauses actually applicable should be further listed in the CPC. Children's products may also be subject to overlapping horizontal requirements such as lead content, surface coating lead, phthalates, small parts and button cell batteries.[16]
Therefore, Chinese enterprises cannot equate "the product has passed ASTM F963 testing" with having completed all children's product certification. Enterprises need to check separately, based on product materials and structure, whether coatings, plasticized materials, detachable small parts, battery compartments or other risk factors exist, and incorporate all applicable rules and testing bases into the CPC and eFiling data.
Enterprises should also verify whether the tested samples are consistent with the mass-produced products. If plastic pellets, inks, coatings, batteries, magnets or component suppliers are changed after testing, the original report may no longer represent the actual product. Such changes may not only trigger retesting but may also require the creation of a new certificate version in the Product Registry.
(3) General-Use Products and Their GCC Requirements
When a general-use product is subject to a mandatory consumer product safety rule, a GCC should generally be issued. Unlike children's products, general-use products are not generally required to use a CPSC-accepted third-party laboratory; enterprises may issue a certificate based on their own testing, testing by a qualified laboratory, or a reasonable testing program[17], but the certifying entity must still ensure that the testing sufficiently covers all applicable rules.[18]
The list of GCC rules published by the CPSC covers categories such as bicycles and bicycle helmets, adult portable bed rails, architectural glazing materials, bunk beds, button cell or coin battery products, carpets, clothing storage units, mattresses, adult apparel, portable fuel containers and certain lighters. This list will be adjusted as new rules are issued and old rules are revised, and enterprises should not rely on a one-time search result over the long term.[19]
For products that exist in both children's and adult versions, the target age and marketing approach will directly affect the type of certificate required. For example, bicycles, helmets, bunk beds, apparel and mattresses may be subject to a GCC as general-use products, or may be subject to third-party testing and a CPC because they are primarily intended for children aged twelve and under. Enterprises need to determine product attributes in light of design features, packaging, advertising, size and the usual user group, and cannot change the legal nature merely by modifying the age description on a product page.
III. The Specific Declaration Process of eFiling
(1) Front-End Identification and Certificate Data Preparation
The first step of eFiling is to determine the applicable rules for the product and form a valid certificate. Chinese manufacturers should first provide the U.S. importer with the product name, product number, target age, bill of materials, manufacturing factory, date of manufacture, test reports and laboratory information. The importer determines on this basis whether the product requires a CPC or GCC and confirms the Citation Codes item by item. At this stage, enterprises should establish the correspondence chain of "product ⟶ rule ⟶ testing ⟶ certificate ⟶ declaration". Each product number should be associated with a specific version, factory and test report, and each Citation Code should be able to find a basis in a test report or a lawful testing exclusion, avoiding the situation where a test report covers only one rule while the certificate makes compliance declarations for multiple rules.
For enterprises with a large number of SKUs, certificates can be uploaded in bulk through the CSV template provided by the CPSC, or an Application Programming Interface (API) can be used to connect the enterprise's internal product system with the Product Registry. The CPSC Document Library now centrally provides the Quick Start Guide, Product Registry Guide, CSV template, API technical specifications, CATAIR declaration guide, Harmonized Tariff Schedule (hereinafter referred to as "HTS") advisory list and Citation Code materials, which should serve as the main official sources for enterprises to establish their operating procedures.
(2) Full PGA, Reference PGA and Disclaimer PGA Declarations
After completing certificate data preparation, enterprises may choose the Full PGA Message Set or the Reference PGA Message Set mode for declaration. For product declarations that fall under an HTS code but do not require a certificate, the Disclaimer PGA Message Set may be used.
When the Full PGA mode is adopted, the importer gives the seven complete certificate data items to the customs broker, who submits them through ACE in each import declaration. This mode does not require prior use of the Product Registry and is suitable for enterprises with low import frequency, a high degree of product customization or frequently changing models. However, because the complete data must be filled in repeatedly for each shipment, enterprises are more prone to data entry errors in product numbers, manufacturing locations and test dates.
When the Reference PGA mode is adopted, the importer first enters and certifies the product certificate in the Product Registry, and then gives the Certifier ID, Product ID and Version ID to the customs broker. The customs broker submits the three certificate identifiers through ACE, and the system references the certificate already stored in the Product Registry on that basis. This mode is suitable for enterprises that repeatedly import the same products, have a large number of SKUs and possess systematic data management capabilities.[20]
Number
Identification Object
Generation Method
Compilation Rules
Change Point
Certifier ID
Certifier ID
The importer bears ultimate responsibility for certifying the certificate
Automatically generated by the system when the importer creates a Product Registry Business Account
It is recommended to use an alphanumeric combination similar to the company name and easy to identify, ≤23 English characters
Does not change when the certificate is updated
Product ID
Product ID
The single product being certified
Designated by the importer itself
One of GTIN, SKU, UPC, model number, serial number, registration number, or alternative number
Does not change when the certificate is updated; a major change to the product itself does not change the number, and the difference is instead distinguished by the Version ID
Version ID
Version ID
The specific version of a product's certificate
Prepared by the importer itself, increasing sequentially with each new certificate and update
Alphanumeric combination, unique only within the scope of the same Product ID (Primary Product ID)
Created anew when the certificate is updated: periodic retest updates, major changes (product design/manufacturing process/component source), testing at a different factory or a different laboratory, modifications after the edit grace period expires, etc. It is the only one of the three identifiers that changes with updates
It should be noted that the Product Registry is merely an independent certificate data storage system and does not automatically send information to ACE. Even if the enterprise has completed certificate entry in the Registry, it must still provide the above three certificate identifiers to the customs broker, who will submit the Reference PGA Message Set.
Disclaimer The PGA Message Set applies to situations where a product falls under an HTS code flagged by CPSC but is not legally required to have a certificate issued, such as pure components intended for production assembly and not for consumer sale, and soft-packaged furniture subject only to the labeling requirements of 16 C.F.R § 1640 and not requiring a GCC. When submitting the Disclaim Message Set, the Intended Use Code must be attached to explain to CPSC that the shipment does not require certificate data.[21]
(3) Risk screening and ongoing management after declaration
After certificate data enters ACE with the import declaration, CPSC can use it to adjust the cargo risk score and decide whether to inspect or further request information. CPSC currently states that in the initial stage of implementation, it will not require ACE to directly reject imports solely because of missing Full or Reference PGA data, and will mainly send warning messages, but CPSC will continue to enforce existing certificate obligations and may ask CBP to detain or seize non-compliant products.[22] Therefore, completing electronic declaration does not mean the enterprise's compliance obligations end. On the contrary, the enterprise must still retain certificates, test reports, production records, and supply chain information, and ensure they can be provided promptly when CPSC requests them. If the product design, materials, manufacturing location, testing institution, or applicable rules change, the enterprise should reassess whether the original testing remains valid and update the certificate and Version ID accordingly.
For repeatedly imported products, although the Reference PGA model can improve efficiency, it can also easily lead to old certificates being mechanically cited for a long time. Enterprises should set certificate validity review checkpoints, for example automatically triggering a version review when suppliers change, annual retesting occurs, regulations are updated, and products are redesigned.
IV. Compliance response recommendations for Chinese enterprises: action checklist and risk alerts
(1) Phase 1: Inventory of products exported to the United States and determination of obligations
Inventory all product lines exported to the United States, and determine one by one the regulatory jurisdiction (whether under CPSC jurisdiction) and certification obligations (whether a CPC or GCC must be issued).
Determine the product's target age and child/adult attributes, and determine the applicability of CPC or GCC (the age tiers in Intended Use Codes 130.000 to 130.006 may be referenced).
Confirm the import status: whether the product is a finished product imported for consumption or warehousing; pure components in principle do not require separate declaration, but products that already have consumer-use functions and can be sold after only simple packaging or a small amount of assembly may still be regarded as finished products.
Refer to the HTS advisory list published by CPSC (about 600 codes) as an aid, but the list is for reference only; products not on the list may still be regulated, and products on the list do not necessarily require a certificate.
Assign a unique Product ID to each product exported to the United States (one of GTIN, SKU, UPC, model number, serial number, registration number, or alternative number), ensuring that at least one can be found on the product packaging, packing list, or commercial invoice.
(2) Phase 2: Testing and certificate verification
Use tools such as Regulatory Robot[23] on the CPSC website to confirm Citation Codes item by item; do not vaguely cite "complies with CPSC requirements."
Verify that each Citation Code can be supported by a test report or a lawful testing exclusion, and avoid a situation where the test report covers only one rule while the certificate declares compliance with multiple rules.
Verify that the tested samples are consistent with the mass-produced product: after changing plastic pellets, inks, coatings, batteries, magnets, or component suppliers, the original report may no longer represent the actual product.
Children's products must be tested by a third-party laboratory recognized by CPSC, and the laboratory's accreditation scope must be checked; it cannot be presumed that a laboratory can test all items merely because it is on the list.
Establish a periodic retesting plan: determine retest frequency according to the testing plan for continuous production, trigger retesting at any time upon major changes, and it is not advisable to rely on one-time test results for a long period.
Adhere to one certificate per product: the same certificate cannot cover different products; if the model, factory, or manufacturing location differs, eFiling must be carried out separately.
(3) Phase 3: Import declaration collaboration
Confirm the declaration model with the importer: Full PGA is suitable for products with low import frequency, high customization, or frequent model changes; for repeatedly imported products with a large number of SKUs, the Reference PGA model is more efficient and less error-prone over the long term, but Product Registry registration and data entry must be completed in advance. Both models require the declaration arrangements to be determined with the customs broker in advance.
Chinese manufacturers generally cannot act as the registering entity for the Product Registry; the importer (usually the Importer Of Record, and in specific circumstances the owner, purchaser, or consignee) must register and complete certification, with the Chinese manufacturer assisting as a trade partner in entering product, manufacturing, and testing data;[24] if the Chinese enterprise has a legal entity in the United States, that U.S. entity may register as the importer.
If the Reference PGA declaration model is adopted, cooperate with the importer to enter and certify the certificate in the Product Registry, obtain the Certifier ID, Product ID, and Version ID, and provide them to the customs broker for submission by reference in each declaration.
Low-value, small parcels, Section 321 de minimis goods, and cross-border e-commerce have no eFiling exemption and must be declared shipment by shipment.
For products that do not require a certificate (such as pure components, soft-packaged furniture subject only to the labeling requirements of 16 C.F.R § 1640, etc.), confirm with the importer the use of the Disclaimer PGA Message Set with the Intended Use Code attached.
(4) Phase 4: Ongoing compliance and version management
Set certificate validity review checkpoints to automatically trigger a version review when suppliers change, annual retesting occurs, regulations are updated, and products are redesigned.
After changes in product design, materials, manufacturing process, component sources, manufacturing location, testing institution, or applicable rules, reassess whether the original testing basis remains valid, and as appropriate retest, update the certificate, and establish a new Version ID.
Retain certificates, test reports, production records, and supply chain information to ensure they can be provided promptly when CPSC requests them.
Continuously monitor official CPSC resources (eFiling Document Library, HTS advisory list, and regulatory updates); it is not advisable to rely on one-time search results for a long period.
(5) Key risk alerts
No low-value exemption: any product requiring a CPC or GCC must complete eFiling regardless of import value.
Pre-clearance system screening: eFiling upgrades compliance review from post-hoc random inspection to system risk screening at the time of import; enterprises cannot rely on luck for customs clearance.
High cost of violations: the absence of electronic compliance data will significantly increase the probability of cargo being detained for inspection and customs clearance delays, and a single violation may face a civil penalty of up to USD 120,000.
Failure to retest after changes equals a mismatch between the certificate and the actual product: if changes in manufacturing location, materials, component suppliers, testing institutions, or applicable rules are not reassessed, the certificate may become invalid and the product may be at risk of detention or seizure.
One certificate per product: the same certificate cannot cover different products; any difference in eFiling elements (such as a different model or a different factory) requires a separate application.
V. Conclusion
What CPSC electronic filing changes is the method of submitting compliance certificates, not the testing and certification requirements for products. Test reports and certificates obtained through prior qualified testing remain valid, and enterprises do not need to retest or reissue them because of the implementation of the new rules. As for the responsible party, the party responsible for the certificate of imported products is usually the importer, and the Product Registry is also established and managed by the importer. A Chinese enterprise that is merely a foreign manufacturer cannot replace the importer in completing certificate certification and eFiling solely by virtue of its manufacturer status; it should, with the importer's authorization, assist as a trade partner in entering product, manufacturing, and testing data. At the same time, as long as a product legally requires a CPC or GCC, eFiling must be carried out shipment by shipment regardless of value, whether it is a small parcel or cross-border e-commerce goods; there is no low-value exemption.
At the declaration stage, all seven items of certificate data are indispensable and must be true, accurate, and complete. The certificate declaration itself has legal effect, and intentionally providing false, fictitious, or fraudulent information may constitute a federal crime. For children's products, testing must be completed by a CPSC-recognized third-party laboratory; the continued validity of the test report usually depends on the testing plan applicable to continuous production periodic testing, and when there are major changes in product design, materials, manufacturing process, component sources, manufacturing location, or testing institution, testing should be reassessed at any time and the certificate and version number updated.
Click to download the full version of Cross-Border Dispute Resolution Publication Issue 49
Questions and answers
When do the CPSC eFiling rules take effect for imported consumer products?
The eFiling rules take effect on July 8, 2026, for most imported consumer products requiring a certificate of compliance. Products entering consumption or warehousing from U.S. foreign trade zones are subject starting January 8, 2027.
Does eFiling require products to be retested or recertified?
No. eFiling only changes the submission method for certificates of compliance from passive retention to proactive filing. It does not impose additional testing or certification obligations, and products generally do not need to be retested because of the new rules.
What are the three tiers for determining whether a product requires eFiling?
The three tiers are: first, regulatory jurisdiction review to confirm CPSC jurisdiction; second, certification obligation review to confirm whether a CPC or GCC is legally required; third, import status review to confirm whether the goods are finished products entering the U.S. for consumption or warehousing.
Is there a low-value exemption from CPSC eFiling requirements?
No. The CPSC has made clear that where a product legally requires certification, the certificate must be declared online regardless of import value. Section 321 de minimis goods and cross-border e-commerce sales do not enjoy an eFiling exemption.
What are the consequences of false or missing certificate data in CPSC eFiling?
False filing may trigger civil penalties and, in serious cases, may constitute a federal crime. Missing electronic compliance data significantly increases the probability of cargo detention and customs clearance delays, and a single violation may face a civil penalty of up to USD 120,000.
Laws and cases cited
Laws
- Consumer Product Safety Act (CPSA)
- Consumer Product Safety Improvement Act (CPSIA)
- Federal Hazardous Substances Act (FHSA)
- Flammable Fabrics Act (FFA)
- Poison Prevention Packaging Act (PPPA)
Regulations
- 16 CFR § 1110
- 16 C.F.R § 1250
- 16 C.F.R § 1640
Standards
- ASTM F963
References
- Special thanks to interns Yang Yuhang and Hong Peiyuan for their contributions to this article
- Certificates of Compliance, 90 Fed. Reg. 1800 (Jan. 8, 2025); U.S. Consumer Product Safety Commission, “Update: Certificates of Compliance and eFiling.
- Consumer Product Safety Act §14, 15 U.S.C. § 2063; 16 C.F.R. §§ 1107, 1109, 1110.
- U.S. Consumer Product Safety Commission, “Children’s Product Certificate (CPC) FAQ”; “General Certificate of Conformity.”
- 16 C.F.R § 1110.13(a)(1) Certificate availabilty , https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1110/section-1110.13
- U.S. Consumer Product Safety Commission, “CPSC Implements Mandatory eFiling for Certificates of Compliance, Targeting Dangerous Foreign Imports,” July 8, 2026., https://www.cpsc.gov/Newsroom/News-Releases/2026/CPSC-Implements-Mandatory-eFiling-for-Certificates-of-Compliance-Targeting-Dangerous-Foreign-Imports
- U.S. Consumer Product Safety Commission, “eFiling Quick Start Guide,” § 2.5.
- 16 C.F.R § 1250 Safety Standard for Toys, https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1250
- ASTM F963 is one of the most important toy safety standards in the United States. It was first published in 1986 and was initially a voluntary industry standard. Section 106 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) required the CPSC to convert it into a mandatory standard, which took effect in 2009. ASTM F963 applies to toys intended for use by children aged 12 and under, and sets different testing requirements according to the child's age (for example, the 0-18 months, 19-36 months and other age brackets), mainly covering mechanical and physical properties, flammability, chemical substances, and labeling and warning of the main risks.
- U.S. Consumer Product Safety Commission, “eFiling Document Library”, https://www.cpsc.gov/eFiling-Document-Library
- U.S. Consumer Product Safety Commission, “Does eFiling Apply to Me?”, https://www.cpsc.gov/efiling/help
- U.S. Consumer Product Safety Commission, “Update: Certificates of Compliance and eFiling”, https://www.cpsc.gov/Business--Manufacturing/Business-Education/Business-Guidance/Certificates
- 16 C.F.R § 1110.3 Finished product “Finished product means a consumer product or other product or substance, or a part of a consumer product or substance, that is subject to a consumer product safety rule under the CPSA, or similar rule, ban, standard, or regulation under any other law enforced by the Commission, that is imported for consumption or warehousing, or is distributed in commerce, and that is packaged, sold, or held for sale to, or for use by, consumers.” https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1110/section-1110.3
- Under the de minimis rule, individual consumer product packages valued below USD 800 may enter the United States duty-free and without formal customs declaration.
- U.S. Consumer Product Safety Commission, “eFiling Frequently Asked Questions - Do the eFiling requirements apply to Section 321 (also known as de minimis) shipments? Are importers of Section 321 (also known as de minimis) shipments required to transmit Disclaim PGA Message Sets?”.
- U.S. Consumer Product Safety Commission, “Rules Requiring Third-Partyy Testing and a Children’s Product Certificate”, https://www.cpsc.gov/Business--Manufacturing/Testing-Certification/Lab-Accreditation/Rules-Requiring-Third-Party-Testing
- A reasonable testing program is a set of testing arrangements designed by the manufacturer or importer itself and approved in writing by management, which ensures that products continue to comply with the applicable regulations by reasonably determining the number, frequency and methods of testing. See U.S. Consumer Product Safety Commission, “General Certificate of Conformity (GCC) FAQ – What is a reasonable testing program?”, https://www.cpsc.gov/FAQ/GCC.
- U.S. Consumer Product Safety Commission, “General Certificate of Conformity (GCC) FAQ”, https://www.cpsc.gov/FAQ/GCC.
- U.S. Consumer Product Safety Commission, “Rules Requiring a General Certificate of Conformity,” https://www.cpsc.gov/Business--Manufacturing/Testing-Certification/Lab-Accreditation/Rules-Requiring-a-General-Certificate-of-Conformity
- U.S. Consumer Product Safety Commission, “eFiling Frequently Asked Questions,” lines 94-99, 118-120.
- U.S. Customs and Border Protection, “CBP and Trade Automated Interface Requirements: CPSC eFiling Implimentation Guide Version 2.5”, May 2026, pp.9.
- U.S. Consumer Product Safety Commission, “eFiling Frequently Asked Questions – Will U.S. Customs and Border Protection (CBP) deny entry of products into the U.S. if importers fail to comply with eFiling?” https://www.cpsc.gov/FAQ/eFiling-Frequently-Asked-Questions-FAQ.
- https://business.cpsc.gov/robot/
- US Consumer Product Safety Commission, “eFiling Quick Start Guide”, January 2025, pp.10.
