Introduction

On 4 March 2026, the European Commission officially published the draft legislative text of the Industrial Accelerator Act (IAA).

The IAA has three objectives: reindustrialisation (raising manufacturing's share of GDP from 14.3% to 20% by 2035), accelerated decarbonisation (low-carbon product standards and demand stimulation), and strategic autonomy (reducing dependence on supply chains concentrated in a single third country). For Chinese companies, this means that the rules for entering the EU market, participating in public procurement and making manufacturing investments will change systematically.

This article is the first in a series of analyses of the IAA, focusing on the institutional framework and legislative developments. Subsequent articles will provide sector-specific analyses of photovoltaics, wind power, batteries and electric vehicles.

01. The institutional framework of the IAA

1. Origin requirements: the baton directing the flow of public funds

The IAA's origin requirements are not a single standard but a three-tier architecture of "rules of origin + equivalence mechanism + direct nationality exclusion".

First, the IAA designs rules of origin to channel public funds towards products originating in the EU. The rules of origin apply not only to public procurement but also to subsidies (public support schemes) and to renewable energy production quotas/contract auctions, and will therefore have an all-round impact on the flow of EU public funds:

At the product level, the IAA's origin requirements differ by product and will rise progressively over time. We will set these out in detail in future articles on individual products.

At the same time, the IAA also designs an "equivalent origin mechanism", which extends the "preferential treatment" for EU-origin products to its "allies":

It is worth noting that the application of the equivalent origin mechanism is subject to supervision by the European Commission. Where a third country does not accord national treatment to EU products and entities, or where there is dependency or a supply security concern, that third country will be excluded from the scope of equivalent origin.

Finally, in addition to the rules of origin, the IAA also designs nationality exclusion rules for public procurement. That is, in public procurement involving electric vehicles or "net-zero technologies" such as photovoltaics, wind power and batteries, where a tender comes from an economic operator owned or controlled by an entity of a third country that has not concluded with the EU an international agreement permitting participation in public procurement, that tender will be excluded.

This means that products originating in China cannot participate in EU public procurement or auctions or obtain EU subsidies, and Chinese-invested enterprises in Europe are also likely to be affected in their participation in public procurement for the relevant products.

2. FDI preconditions: not "choose four of six", but "one plus three"!

If Chinese companies choose to invest in the EU in order to meet the IAA's origin requirements, they will face the strict review the IAA designs for foreign direct investment. In the four strategic emerging sectors of batteries, battery electric vehicles, photovoltaics, and the extraction, processing and recycling of critical raw materials, where the investment amount exceeds EUR 100 million and the investor's third country accounts for more than 40% of global manufacturing capacity in the relevant industry, the investment falls within the IAA's review scope.

Once within the review scope, the foreign investment may be implemented only with the express approval of the member state's "investment authority" or the European Commission. The approval conditions appear on their face to be a "choose four of six" model, but because the local employment condition is mandatory (i.e. item 5 in the table below), it is in fact a "1 + 3" model. The specific conditions are as follows:

02. Impact: Chinese companies face "encirclement" by rules of origin and "interception" by FDI review

If the above origin rules and FDI review conditions take effect, companies in the relevant Chinese industries will face "encirclement" by the changed rules of origin and "interception" by FDI review in Europe.

On rules of origin: China has not signed an FTA with the EU or established a customs union with it, and is not a GPA party. Chinese products cannot obtain EU origin status, will lose access to the EU public procurement market, and cannot obtain certain EU renewable energy production quotas/feed-in tariff contracts. For products that depend on public funds, such as photovoltaics and batteries, the "produce in China — export to Europe" model will be severely undermined.

On FDI review: investing in Europe faces the "1+3" preconditions. Restricted control, mandatory technology sharing and rising operating costs — the economic viability and feasibility of investment will be severely impaired.

If the IAA takes effect on the terms of the draft currently published, companies in specific Chinese industries will be caught in a dilemma.

03. Entry into force and uncertainties

The IAA is planned to enter into force in 2027, but its provisions on origin requirements will be implemented in stages: depending on the product category, entry into force will be delayed by between six months and three years relative to the IAA's overall entry into force.

The above timelines may be postponed. In recent years, major EU legislation has usually undergone multiple rounds of amendment and delay, with actual entry into force later than expected. As for the IAA draft, there are significant divergences at member state level: disputes over protectionism, market intervention and the design of investment conditions coexist. The European Commission's internal RSB has issued a negative review opinion, and third countries also strongly oppose it. The IAA's legislative process is therefore very likely to be delayed, which gives Chinese companies a window to actively follow and participate in the legislative process and to plan ahead according to their own circumstances.

04. Recommendations for Chinese companies

1. Track the legislation and speak up proactively

The IAA is still a draft. Member state disputes, third-country opposition, WTO compliance risks, and obstacles to the EU's own decarbonisation and reindustrialisation objectives — these factors are very likely to lead to the radical restrictive provisions in the draft being modified in the future legislative process.

Chinese companies likely to be affected by the IAA are advised to continuously track legislative developments and assess the impact. Seize every opportunity to comment, actively provide feedback, minimise adverse effects and strive to preserve room to remain in the European market.

2. Reassess global positioning: recalibrate Europe strategy against the IAA's core provisions

The IAA places the place of origin of products and the place of capacity deployment in different tiers of preferential treatment. Chinese products cannot obtain EU origin status, nor is it easy to obtain preferential treatment through the "equivalent origin" route. Chinese companies can assess the extent to which their European business depends on public procurement, auctions and subsidies, analyse and determine the IAA's specific impact on them, and tailor response plans accordingly.

Chinese companies likely to be affected by the IAA are advised to reassess factors such as the supply chain structure, costs and target markets of specific projects and their global capacity configuration, and to consider deploying within the EU or in third countries "deemed to be of EU origin" (i.e. countries with which the EU has an FTA/customs union, or which are GPA contracting parties). At the same time, in light of the IAA's specific origin requirements for different products, they should consider promoting coordinated supply chain adjustments so that origin issues concerning key input products do not drag down the entire product line.

When choosing a country, it is advisable to consider both the purpose and the economic viability of the investment, and in particular to assess factors such as the target country's origin status and the stability and friendliness of its own FDI review regime.

3. Investment in Europe: seize the window and preserve governance control

Companies investing in Europe need to grasp a dual time window.

Time window one: the IAA's FDI review provisions apply immediately upon the IAA's overall entry into force, and generally investments completed before entry into force are not subject to the FDI preconditions. Companies may therefore consider accelerating the investment process to complete legal implementation before the IAA's entry into force.

Time window two: the rules of origin provide for staggered transition periods of six months to three years for different products. At the investment structure design stage, local procurement, production and supply chains should be built into the timetable to ensure that local content thresholds are met before the transition period expires.

Structure design needs to anticipate IAA restrictions while safeguarding core interests. Companies can make prudent arrangements through corporate governance structure design, tiered technology licensing, limited use scenarios and territories, and retention of ownership of improvement results.

It should be noted that the IAA's shareholding caps are intended to weaken foreign control. If governance arrangements too overtly sideline the European side, they may invite regulatory scrutiny. The balance of "minority equity without loss of governance position" depends on professional design and a sense of proportion.

Jincheng Tongda will continue to track IAA legislative developments and provide companies with compliance and investment strategy services. Future sector-specific analyses of batteries, photovoltaics and electric vehicles will help companies navigate EU market access and investment positioning with precision.

Questions and answers

What does the EU Industrial Accelerator Act's origin requirement mean for Chinese products?

Chinese products cannot obtain EU origin status because China has no FTA or customs union with the EU and is not a GPA party. They therefore lose access to the EU public procurement market and cannot obtain certain renewable energy production quotas or feed-in tariff contracts, undermining the 'produce in China — export to Europe' model.

When does the EU Industrial Accelerator Act's FDI review apply to Chinese investments?

Review applies in batteries, battery electric vehicles, photovoltaics, and the extraction, processing and recycling of critical raw materials where the investment exceeds EUR 100 million and the investor's third country accounts for more than 40% of global manufacturing capacity in the relevant industry. Such investment may proceed only with express approval.

What are the '1+3' approval conditions under the EU Industrial Accelerator Act?

The conditions appear to be 'choose four of six', but because the local employment condition is mandatory, the model is in fact '1+3'. The approval conditions include restricted control, mandatory technology sharing and rising operating costs, which impair the economic viability and feasibility of investment.

When will the EU Industrial Accelerator Act enter into force?

The IAA is planned to enter into force in 2027, with origin requirements implemented in stages delayed by six months to three years depending on product category. The timeline may be postponed given member state divergences, the Commission's negative RSB review opinion and third-country opposition.

What should Chinese companies do while the EU Industrial Accelerator Act is still a draft?

Companies should track legislative developments, assess the impact and use comment opportunities to seek modifications. They should reassess supply chains and global capacity configuration, consider deploying in the EU or in countries deemed of EU origin, and use the dual time window to complete investments before entry into force and meet local content thresholds.

Laws and cases cited

Other

  • Industrial Accelerator Act (IAA)